Product details
VIB®05 Vibration testers
The 3-in-1 machine condition monitoring
Vibration·Bearing Condition·Temperature
Vibration monitoring with VIB05
Vibration monitoring is a cost-effective predictive maintenance strategy. Changes in vibration levels are usually only changes in operating conditions, but in most cases, vibration measurements can detect problems long before the machine is damaged. Periodic vibration measurements of fans, motors, pumps, compressors and other rotating industrial machinery help prevent premature replacement of mechanical parts and minimize downtime.
The VIB05 Vibration testers portable Vibration and Temperature Meter Kit has been designed for use as both an entry level and also a comprehensive vibration/temperature monitoring instrument for maintenance engineers across all types of industry. The kit consists of the compact vibration meter with a combined non-contact temperature measuring sensor airded by a locator beam, a hand held probe, a magnetic mount for more permanent installations, a protective carrying case, an instruction manual and battery chargers for both mains and in-car use. The Vibration testers is microprocessor based and by selection of the controls can be easily set up to monitor acceleration (g) levels, velocity (mm/sec), displacement (µm), bearing condition (BG or BV) and temperature (°C or °F). A display hold function is also included. The unit, which conforms to ISO 2954 and ISO 10816-3 also has an automatic alarm check for bearing condition. Operating from an internal re-chargeable Lithium battery, the meter offers 48 hours continuous operation. From flat, the unit can be recharged in 3 hours using either the mains or in-car charger supplied with the kit. Because of its compact size, ease of use and battery operation, the VIB05 allows engineers to monitor vibration and temperature levels on important machinery anywhere around the factory
The VIB05 Vibration testers can be used to effectively monitor vibration levels in most types of rotating machinery, such as electric motors, fans, and pumps, in a diversity of industrial environments.
3 Measurements
Machine Vibration Measures
Velocity in mm/s RMS; Acceleration in g RMS; Displacement in um Peak-Peak
Vibration Evaluation: According to ISO10816-3.
Bearing Condition Measures
Bg - Hi Frequency Acceleration in g RMS;Bv - Hi Frequency Velocity in mm/s RMS.
Bearing Status Check: By using rules of thumb
Temperature Measure
Non-contact Infrared Sensor,Target and Environment in °C or °F,Red Laser Pointer.
VIB05 Specifications
Display: Monochromatic LCD, 128x64 pixial
Sensor: IEPE Accelerometer, 100mv/g, Integral 80 cm cable, BNC connector
Vibration:
Acceleration: 0-20 g Peak Frequency 10-12kHz
Velocity: 0-200mm/s RMS Frequency 10Hz-1kHz
Displacement: 0-2000 μm Peak-Peak Freq. 10Hz-1kHz
Bearing Status:
Bg: 0-20 g RMS Freq. Range 1kHz-12 kHz
Bv: 0-200 mm/s RMS Freq. Range 1kHz-12 kHz
Accuracy: < +/-5%
Alarm Indication:
Vibration Evaluation for velocity measure: ISO10816-3
Bearing Status check for BG and BV: Rule-of-thumb
Temperature:
IR Sensor temperature range: -20 °C to 120°C or -5°F to +250°F
Accuracy: ±2°C; Resolution: 1°C;
Laser guide : Red, <1mW. IEC 60825-1 compliant
Distance to surface D:S = 8:1; Recommend distance range: < 20 cm
Power & Charger:
Lithium rechargeable battery, 3.6V 1700 mAh,
Recharge time 3 hours ; Operating time >50 hours continuous
Mains charger: AC 100-240 V, 50/60 Hz input; 4.2 V DC 600 mA output
In-car charger: DC 12-24 V input; 4.2 V DC 600 mA output。
Environment:
Operation temperature: -10°C to +50°C; Storage temperature: -20°C to +60°C
Enclosure: IP64 - Dust-tight and splash-resistant
Electromagnetic compatibility certificate: 2004/108/EC
Dimensions:115 x 75 x 25mm(LxWxT)
Weight incl. battery:230g
VIB05 Complete Kit
http://www.kmvibrationanalyzer.com/